New for 2021 - the Titan Electric SUP pump with its built-in rechargeable lithium battery is unlike other products on the market because you can inflate your SUP board anywhere making it fully portable and it takes the stress out of inflating your board either manually or beside your car in a car park.
In addition, the car aux adaptor allows you to inflate your board like the conventional electric pumps if you run the battery down whilst out.
To charge the battery use the mains power (AUS 3 pin plug) at home (takes 2-3 hrs). Presets of 12/16/20psi on the LCD display and you can also select any psi from 2-20 psi to auto inflate your board. With auto shut off so no risk of over inflation.
On a full battery charge, the pump can inflate 1 inflatable paddle board to 15 psi (in 12-15 minutes) or 2 inflatable kayaks to 8 psi depending on size, pressure, and conditions. Comes with a mains charger and cigarette aux adaptor, two interchangeable washers, and nozzles for SUP boards, and 3 more nozzles for other inflatables (kayaks, airbeds, tents, water toys etc). Comes in a neat carry bag with a shoulder strap and weighs 1.5kg.
For use with Bay Sports Air Glide kayaks, we recommend you use the included red o-ring for the most secure connection to your kayaks valves.
For Air Pontoon, we recommend you purchase the higher volume Hercules Electric Pump.
Notice: Maximum usage time is 15 minutes. Please do not have the Titan pump plugged into AC power whilst inflating the product. If the battery runs out, you can plug into the cigarette charger port to continue operation.
Measuring range: 12PSI/16PSI/20PSI
Pressure gauge： ±0.5PSI
Power: Voltage 240w
Power type: Li-polymer LiPo
Battery capacity： 7500mAh
Power supply： Built-In Lithium-Ion battery + 12v Car power + 240V Mains power adaptor
Cylinder type: 35mm
Working Temperature： -20~+60°C
Included Accessories: Carry bag, Car lighter cable(1m), Hose, Multiple Nozzles for Kayaks, Airbeds, Tents, Water toys etc, Spare hose washer.
Pump size: 9.45" long X 5.9" wide X 3.54" high
How to set PSI on Titan Electric Pump
This video shows how to change the PSI pressure on the digital display. There are presets for 12, 16 and 20 psi, however if you wish to set to any individual value, you can do so by:
1) Turn on the pump by pressing the power button
2) Push the + button so it shows the 12 psi preset number
3) Press and Hold the + or - button until the display starts blinking
4) Press the + or - button to increase or decrease the PSi
5) Once the desired pressure is shown on the screen, wait 3 seconds for the display to stop blinking
6) Push the power button again and the pump will start automatically inflating until this pressure is reached, and automatically turn off
7) The plug must be in a running car engine to inflate the SUP board.